|
 GP500
Beaded Elegance
Recommended Fabrics
Lightweight doubleknit
Faux leather
Suede cloth
Note: The fabric you select should not fray and have a bit of
stretch. |
Notions
30 bugle beads
500 seed beads
25 delica beads (gold)
Gloving needle - Sharp #7
Beeswax
Beading needle
Gloving thread (craft or topstitching thread)
Tracing paper, wheelM
Disappearing fabric marker
1/2" applique/sequin pins
Yardage Requirements |
Faux leather
Fashion fabric |
52"
60" wide
45" wide |
1/3 yd.for Small, Medium
3/8 yd.for Large, Xlarge
1/3 yd.for Small, Medium
3/8 yd.for Large, Xlarge
1/3 yd.for Small, Medium
3/8 yd.for Large, Xlarge |
|
Back to GP500 Glove
Pattern |
 GP503 Floral Fantasy
Note: The design on the gloves is the same as the design on hat pattern HP218.
Recommended Fabrics
Lightweight Doubleknit
Wool doubleknit
Suede cloth
Note: The fabric you select should not fray and have a bit of stretch. |
Notions
Persian tapestry yard in the following colors and quantities:
Dark - 2 double strands (approx. 29" long)
Medium - 2 double strands (approx. 29" long)
Light - 2 double strands (approx. 29" long)
Green (leaves, stem) - 1 double strand (approx. 29" long)
18 - 4mm pearls (6 pearls per flower)
Beading needle
Tapestry needle
Tracing paper, wheel
Gloving needle - Sharp #7
Beeswax
Gloving thread (craft or topstitching thread)
1/2" applique/sequin pins
Yardage Requirements |
Fashion fabric
Fusible interfacing (knit) |
45" wide
45" wide |
1/3 yd.for Small, Medium, Large, Xlarge
1/8 yd.for Small, Medium, Large, Xlarge |
|
Return to GP503 Glove
Pattern |
 GP505 Moving Forward
Recommended Fabrics
Faux leather
Suede cloth
Faux suede
Note: The fabric you select should not fray and have a bit of stretch. |
Notions
Glove tape (opt.)
Glove needle - Sharp #7
Gloving thread - craft or topstitching thread
Beeswax
Beading needle
Beading thread (Nymo D)
200 1/2" Japanese bugle beads or 150 3/8" Japanese bugle beads or 500 delica beads
Note: Delica beads will make a straighter line because they
"lock" together due to the straight cut on each end
Tracing paper, wheel
1/2" applique/sequin pins
Yardage Requirements |
| Fashion fabric |
52"
60" |
1/3 yd.for Small, Medium
3/8 yd.for Large, Xlarge
1/3 yd.for Small, Medium
3/8 yd.for Large, Xlarge |
| Return
to GP505 Glove Pattern |
 GP509 Saucy Sophisticate
Recommended Fabrics
Stretch velvet
Nylon lycra
Cotton lycra
Note: This pattern is designed for two-way (four-way) stretch fabric. The greatest amount of stretch should be across the width of the hand.
Note: The fabric you select should not fray and have a bit of stretch. |
Notions
Glove thread (craft or topstitching thread)
Glove needle (Sharp #7)
Beeswax
Glove tape (opt.) - to measure width of hand to obtain size
1/2" applique/sequin pins
Yardage Requirements |
| Fashion fabric |
45" Above elbow
45" Below elbow
60" Above elbow
60" Below elbow
|
1/2 yd.for Small, Medium, Large
1 yd.for Xlarge
1/2 yd.for Small, Medium, Large
1 yd.for Xlarge
1/2 yd.for Small, Medium, Large
1 yd.for Xlarge
1/2 yd.for Small, Medium, Large
1 yd.for Xlarge |
|
Return to GP509 Glove
Pattern |
 GP512 Gala Gauntlet
Recommended Fabrics
Faux leather
Faux suede
Note: The fabric you select should not fray and have a bit of stretch. |
Notions
Glove tape - to measure hand for size (opt.)
Glove thread - craft or topstitching thread
Beeswax
Proportional scale - to determine how much to increase or decrease pattern size on copier (opt)
Needle - Sharp #7
Beeswax
Tracing paper, wheel (opt.)
Disappearing marking pen (opt.)
1/2" applique/sequin pins
Yardage Requirements |
Fashion fabric
(pair gloves)
Gauntlet lining
Lining (opt.)
Fashion fabric
(Gauntlet only)
Fashion fabric
(Glove only) |
44/45" |
3/8 yd.for Small
1/2 yd.for Medium, Large, Xlarge
1/2 yd.for Small, Medium, Large, Xlarge
3/8 yd.for Small
1/2 yd.for Medium, Large, Xlarge
1/2 yd.for Small, Medium, Large
1/3 yd.for Xlarge
1/2 yd.for Small
1/3 yd.for Medium, Large, Xlarge |
 GP514 Manly Pursuits
Recommended Fabrics
Double woven nylon
Faux leather
Faux suede
Note: The fabric you select should not fray and have a bit of stretch. |
Notions
Glove thread (craft or topstitching thread)
Glove needle (Sharp #7)
Beeswax
Glove tape (opt.) - to measure width of hand to obtain size
Tracing wheel, paper (opt.)
Disappearing marking pen
1/2" applique/sequin pins
Yardage Requirements |
Fashion fabric
Bias binding (opt.) |
50-60" |
1/3 yd.for Small, Medium
3/8 yd.for Large, Xlarge
1/2 yd.for Small, Medium, Large, Xlarge |
 GP519 Grande Finale
Recommended Fabrics
Double woven cotton
Double woven nylon
Doubleknit
Suede cloth
Note: The fabric you select should not fray and have a bit of stretch. |
Notions
Glove thread (craft or topstitching thread)
Glove needle (Sharp #7)
Glove tape (opt.) - to measure width of hand to obtain size
Tracing wheel, paper (opt.)
Disappearing marking pen (opt.)
Beeswax
1/2" applique/sequin pins
Yardage Requirements |
| Fashion fabric |
45-60" Below elbow
Above Elbow |
1/2 yd.for Small, Medium
2/3 yd.for Large, Xlarge
2/3 yd.for Small, Medium, Large, Xlarge |
GP524 Manly Pursuits (leather)
Recommended Fabrics
Soft, supple but firm genuine leathers such as pigskin or cowhide.
Note: After purchasing the leather and prior to cutting out the pattern pieces, the leather should be stretched until it won't stretch any more. It's best to do this using the edge of a table or over your knee. This will expose any flaws and allow you to position your pattern pieces on the leather to avoid them. Your gloves will also fit better. |
Notions
Glove thread (craft or topstitching thread)
Glove leather needle (Size 6)
Glove tape (opt.) - to measure width of hand to obtain size
Beeswax
Soft, strong glue, e.g. rubber cement
Miniature clothes pins
Yardage Requirements
Normally leather is sold by the square foot. Take your pattern with you to select the leather. Place the tranks in the center and the thumbs and fourchettes on the outer edges. Examine the leather in those areas for blemishes. |
 GP531 Luxury Leather (leather)
Recommended Fabrics
Soft, supple but firm genuine leathers such as pigskin or cowhide.
Note: After purchasing the leather and prior to cutting out the pattern pieces, the leather should be stretched until it won't stretch any more. It's best to do this using the edge of a table or over your knee. This will expose any flaws and allow you to position your pattern pieces on the leather to avoid them. Your gloves will also fit better. |
Notions
Glove thread (craft or topstitching thread)
Glove leather needle (Size 6)
Glove tape (opt.) - to measure width of hand to obtain size
Beeswax
Soft, strong glue, e.g. rubber cement
Miniature clothes pins
Yardage Requirements
Normally leather is sold by the square foot. Take your pattern with you to select the leather. Place the tranks in the center and the thumbs and fourchettes on the outer edges. Examine the leather in those areas for blemishes. |
GP534 Grand Finale (leather)
Recommended Fabrics
Soft, supple but firm genuine leathers such as pigskin or cowhide.
Note: After purchasing the leather and prior to cutting out the pattern pieces, the leather should be stretched until it won't stretch any more. It's best to do this using the edge of a table or over your knee. This will expose any flaws and allow you to position your pattern pieces on the leather to avoid them. Your gloves will also fit better. |
Notions
Glove thread (craft or topstitching thread)
Glove leather needle (Size 6)
Glove tape (opt.) - to measure width of hand to obtain size
Beeswax
Soft, strong glue, e.g. rubber cement
Miniature clothes pins
Yardage Requirements
Normally leather is sold by the square foot. Take your pattern with you to select the leather. Place the tranks in the center and the thumbs and fourchettes on the outer edges. Examine the leather in those areas for blemishes. |
|
